While Cutting
      Back to home
      1. Help Center
      2. AutoPass
      3. While Cutting

      General User Interface (Cutting)

      To start cutting, click the green handle button. EN.png

      While cutting with AutoPass, the screen displays additional information to guide you through each pass.

      1. Bit Diameter: Displays the bit diameter which you have inputted

      2. Current Offset: Displays the offset for the current pass 

      3. Cut Type: Displays the cut type for the entire AutoPass operation 

      4. Cut Depth: Displays the total depth which Origin will cut to in the AutoPass operation

      5. Pass Indicator: Displays the current pass and the total number of passes