![[object Object]](https://images.prismic.io/shapertools/1382217d-c13f-4923-88f4-5e0eafa6abbe_Placeholder_Studio_Nav.png?auto=compress,format&rect=0,0,1528,470&w=1528&h=470)
![[object Object],[object Object]](https://images.prismic.io/shapertools/282d6f93-ccd2-434f-923f-eed63824d70a_Placeholder_Hub_Nav.png?auto=compress,format&rect=0,61,1529,470&w=1528&h=470)
![[object Object],[object Object]](https://images.prismic.io/shapertools/8f1a60d5-4775-4c41-80e5-81a107fa0b98_Sessions.jpg?auto=compress,format&rect=0,538,3000,923&w=1528&h=470)
AutoPass can be used to cut closed paths set to Inside, Outside, or On-Line cut types.
AutoPass cannot be used on Pocket Cuts or on open paths. An open path is any path which is not joined all the way around to form a closed shape.
In some situations, your AutoPass settings may prevent Origin from cutting. If your cut path is small or narrow, the roughing passes setting can make the path uncuttable. Reducing the roughing offset or turning off the roughing passes setting can solve this problem.