Are you planning to offer a higher-powered spindle?

We don't have plans for a higher-powered spindle at this time. We believe that the 720W motor is the perfect balance of weight, precision, and power for Origin.

If you are working on a project that requires lots of horsepower, we recommend doing one or two passes with Origin, then using a following bit with a larger motor to cut through lots of tough material at once. Here's an example video demonstrating this technique on a thick slab table.

We also recommend high efficiency cutters for many cut operations. These include:

8mm x 35mm Up-Spiral Flat Router Bit

16mm x 16mm Clearing Router Bit

5mm x 20mm Up-Spiral O-flute Router Bit

8mm x 35mm Roughing Bit

You can find some recommendations for when to use each of these cutter by clicking the name above.