Connecting to Origin

Note: Connected Caliper is only compatible with Origin software Kirby Cove and later. Click here for instructions to check what version your tool is running.

Connected Caliper will only connect to a new device if it's not connected to any other device.

To connect the Connected Caliper to Origin, tap the to access your tools settings. From here, selected Connected Tools:

Then tap Connect:

Follow the instructions on-screen. Once prompted, click and hold the Connect button on the top of the Caliper for four seconds:

It will connect automatically.

On Origin you'll be returned to the Connected Tools screen. Caliper will be marked as Connected: