Skip to content
English
Contact us
Go to shapertools.com
  • There are no suggestions because the search field is empty.

Bit Size

The Bit Size option allows you to specify the diameter of the cutter installed in Origin's spindle collet.

Three different bits are provided with Origin:

  • 1/4" up-cut spiral

  • 1/8" up-cut spiral

  • V60 engraving bit

All three of these bits appear as presets for quick reference.

Screenshot_2018-04-25_17.22.49.png

Tap OK when ready.  Origin will remind you to perform a Z Touch so that Origin can understand the Z height of the new cutter.

Z Touch is explained in more detail in a separate article.