Connecting the Caliper to your Device
      Back to home
      1. Help Center
      2. Connected Caliper
      3. Connecting the Caliper to your Device

      Connecting to Origin

      Note: Connected Caliper is only compatible with Origin software Kirby Cove and later. Click here for instructions to check what version your tool is running.

      Connected Caliper will only connect to a new device if it's not connected to any other device.

      To connect the Connected Caliper to Origin, tap the settings.png to access your tools settings. From here, selected Connected Tools:

      2023 Nov 30, 21.39.27.png

      Then tap Connect:

      2023 Nov 30, 21.39.41.png

      Follow the instructions on-screen. Once prompted, click and hold the Connect button on the top of the Caliper for four seconds:

      ningen_quick-guide-artwork_master-05.png

      It will connect automatically.

      On Origin you'll be returned to the Connected Tools screen. Caliper will be marked as Connected:

      2023 Nov 30, 21.40.39.png