Cut Mode
      Back to home
      1. Help Center
      2. Origin
      3. Cut Mode

      Bit Size

      The Bit Size option allows you to specify the diameter of the cutter installed in Origin's spindle collet.

      Three different bits are provided with Origin:

      • 1/4" up-cut spiral

      • 1/8" up-cut spiral

      • V60 engraving bit

      All three of these bits appear as presets for quick reference.

      Screenshot_2018-04-25_17.22.49.png

      Tap OK when ready.  Origin will remind you to perform a Z Touch so that Origin can understand the Z height of the new cutter.

      Z Touch is explained in more detail in a separate article.