Guide to Speciality Bits

Used for similar applications to the standard upcut bit with deeper cutting flute

For cutting curved channels. Great for signmaking and cutting boards.

Used in the Elate Lamp project on ShaperHub.

You can see this bit demonstrated in this Shaper Session.

Multiple flutes are great for engraving in a wider array of materials.

Can be used to cut wedged tenons, like in the Trestle Bench project.

5mm T-Slot Router Bit

SF1-8-TSC

• Overall Length: 50 mm
• Shank Diameter: 8 mm
• Cutter Diameter: 10.5 mm
• Cutter Length: 13 mm
• Cutter Neck Diameter: 5 mm

Used for a variety of undercut operations, including the Pencil Tray Premium Project.

Plunging T-slot means you can cut slots or keyhole mounts.

15º Dovetail Router Bit

SF1-8-DC15

• Overall Length: 46 mm
• Shank Diameter: 8 mm
• Cutter Diameter: 13.8 mm
• Cutter Length: 13.5 mm

15˚ geometry is rare in North America.

Used in the Fellbach Box ShaperHub project.

⅛” X ¼” Up-Spiral O-flute Router Bit

SE1-2500-2500C

• Overall Length: 2.5”

• Shank Diameter: 0.25”

• Cutter Diameter: 0.125”

• Cutter Length: 0.25”

Features O-Flute geometry good for cutting harder materials like acrylic and soft metals.

 Some cut setting recommendations can be found in the Materials Recommendations article.

⅛” X ½” Up-Spiral O-flute Router Bit

SE1-2500-5000C

• Overall Length: 2.5”

• Shank Diameter: 0.25”

• Cutter Diameter: 0.125”

• Cutter Length: 0.5”

A longer version of the ⅛” X ¼” Up-Spiral O-flute Router Bit.

Similar geometry with a deeper cutter for more depth.

As with the shorter version of this bit you can find cutting information in the Materials Recommendations article.

8mm X 35mm Up-Spiral Flat Router Bit

SF1-8-8DP

• Overall Length: 85 mm
• Shank Diameter: 8 mm
• Cutter Diameter: 8 mm
• Cutter Length: 35 mm

Wider and featuring three flutes greater depths are manageable in a variety of materials.

 Great for clearing material as well as roughing and finishing passes.

You can review more details about this bit, including specific materials recommendations, here.

16mm X 16mm Clearing Router Bit

SF1-8-16D

• OAL: 65 mm
• Shank Diameter: 8 mm
• Cutting Diameter: 16 mm
• Cutter Length: 16 mm
• Material: Solid Carbide
  

Three-flute geometry.

Clears material quickly at 12mm passes.

More on this bit, including materials recommendations, here.

90° Engraving Router Bit

SE1-2500-V90E

• Overall Length: 1.5"
• Shank Diameter: .25"
• Cutter Angle: 90°
• Cutter Length: .125"

90° geometry can be used on profiles to make invisible miters

Double flutes stay sharp longer

Shallower point increases bit durability

¼” X 1½” Up-Spiral O-flute Router Bit

SE1-2500-1500C

• Overall Length: 3"
• Shank Diameter: .25"
• Cutting Diameter: .25"
• Cutter Length: 1.5"

Ideal for deep cuts in non-ferrous metals and acrylic
Polished O-flute resists chip adhesion
Appropriate for a wide range of non-wood materials

5mm X 20mm Up-Spiral O-flute Router Bit

SF1-8-5D

• Overall Length: 78 mm
• Shank Diameter: 8 mm
• Cutting Diameter: 5 mm
• Cutter Length: 20 mm
• Usable Length: 30 mm

Long-reach O-flute geometry.

Allows deep first-pass cuts into hard and soft wood, including up to 3/4" first passes.

More on this bit, including materials recommendations, here.

6mm x 30mm Up-Spiral Flat Router Bit
SF1-8-6F3

• Overall Length: 80 mm
• Shank Diameter: 8 mm
• Cutter Diameter: 6 mm
• Cutter Length: 30 mm
• Usable Length: 45 mm

30 mm cutting length plus a clamping neck enables cutting along Origin’s full Z-axis travel.

Designed for high feed rates with good cut quality in a wide range of materials.

4mm x 15mm Up-Spiral Flat Router Bit

SF1-8-4F2

• Overall Length: 80 mm
• Shank Diameter: 8 mm
• Cutter Diameter: 4 mm
• Cutter Length: 15 mm

Stability during deep roughing passes and good cut finish on deep finishing passes
Designed for high feed rates with good cut quality in a wide range of materials

8mm x 35mm Roughing Bit

SF1-8-8R

• Overall Length: 80 mm
• Shank Diameter: 8 mm
• Cutter Diameter: 8 mm
• Cutter Length: 35 mm
• Usable Length: 45 mm

35 mm cutting length plus a clamping neck enables cutting along Origin’s full Z-axis travel

Designed for rough passes with a high feed rate in a wide range of materials